Configuring CROSSTOOL

Overview

This tutorial uses an example scenario to describe how to configure CROSSTOOL for a project. It’s based on an example C++ project that builds error-free using gcc, clang, and msvc.

In this tutorial, you configure a CROSSTOOL file so that Bazel can build the application with emscripten. The expected outcome is to run bazel build --config=asmjs test/helloworld.js on a Linux machine and build the C++ application using emscripten targeting asm.js.

Setting up the build environment

This tutorial assumes you are on Linux on which you have successfully built C++ applications - in other words, we assume that appropriate tooling and libraries have been installed.

Set up your build environment as follows:

  1. If you have not already done so, download and install Bazel 0.19 or later.

  2. Download the example C++ project from GitHub and place it in an empty directory on your local machine.

  3. Add the following cc_binary target to the main/BUILD file:

    cc_binary(
        name = "helloworld.js",
        srcs = ["helloworld.cc"],
    )
    
  4. Create a .bazelrc file at the root of the workspace directory with the following contents to enable the use of the --config flag:

    # Create a new CROSSTOOL file for our toolchain.
    
    build:asmjs --crosstool_top=//toolchain:emscripten
    
    # Use --cpu as a differentiator.
    
    build:asmjs --cpu=asmjs
    
    # Specify a "sane" C++ toolchain for the host platform.
    
    build:asmjs --host_crosstool_top=@bazel_tools//tools/cpp:toolchain
    

In this example, we are using the --cpu flag as a differentiator, since emscripten can target both asmjs and Web assembly. We are not configuring a Web assembly toolchain, however. Since Bazel uses many internal tools written in C++, such as process-wrapper, we are specifying a “sane” C++ toolchain for the host platform.

Configuring the C++ toolchain

To configure the C++ toolchain, repeatedly build the application and eliminate each error one by one as described below.

Note: This tutorial assumes you’re using Bazel 0.19 or later. If you’re using an older release of Bazel, the build errors listed may appear in a different order, but the configuration procedure is the same.

  1. Run the build with the following command:

    bazel build --config=asmjs helloworld.js
    

    Because you specified --crosstool_top=//toolchain:emscripten in the .bazelrc file, Bazel throws the following error:

    No such package `toolchain`: BUILD file not found on package path.
    

    In the workspace directory, create the toolchain directory for the package and an empty BUILD file inside the toolchain directory.

  2. Run the build again. Because the toolchain package does not yet define the emscripten target, Bazel throws the following error:

    No such target '//toolchain:emscripten': target 'emscripten' not declared in
    package 'toolchain' defined by .../toolchain/BUILD
    

    In the toolchain/BUILD file, define an empty filegroup as follows:

    package(default_visibility = ['//visibility:public'])
    filegroup(name = "emscripten")
    
  3. Run the build again. Bazel throws the following error:

    The specified --crosstool_top '//toolchain:emscripten' is not a valid
    cc_toolchain_suite rule.
    

    Bazel discovered that the --crosstool_top flag does not point to the cc_toolchain_suite rule. In the toolchain/BUILD file, replace the empty filegroup with the following:

    cc_toolchain_suite(
    name = "emscripten",
    toolchains = {
             "asmjs": ":asmjs_toolchain",
         "asmjs|emscripten": ":asmjs_toolchain",
        },
    )
    

    The toolchains attribute automatically maps the --cpu (and also --compiler when specified) values to cc_toolchain. You have not yet defined any cc_toolchain targets and Bazel will complain about that shortly.

  4. Run the build again. Bazel throws the following error:

    The crosstool_top you specified was resolved to '//toolchain:emscripten',
    which does not contain a CROSSTOOL file.
    

    Bazel expects a CROSSTOOL file in the tooolchain:emscripten package. Create an empty CROSSTOOL file inside the toolchain directory.

  5. Run the build again. Bazel throws the following error:

    Could not read the crosstool configuration file
    'CROSSTOOL file .../toolchain/CROSSTOOL', because of an incomplete protocol
    buffer (Message missing required fields: major_version, minor_version, default_target_cpu)
    

    Bazel read the CROSSTOOL file and found nothing inside. Populate the CROSTOOL file as follows:

    major_version: "1"
    minor_version: "0"
    default_target_cpu: "asmjs"
    
  6. Run the build again. Bazel throws the following error:

    The label '//toolchain:asmjs_toolchain' is not a cc_toolchain rule.
    

    This is an important milestone in which you define cc_toolchain targets for every toolchain in the CROSSTOOL file. This is where you specify the files that comprise the toolchain so that Bazel can set up sandboxing. Add the following to the toolchain/BUILD file:

    filegroup(name = "empty")
    
    cc_toolchain(
        name = "asmjs_toolchain",
        toolchain_identifier = "asmjs-toolchain",
        all_files = ":empty",
        compiler_files = ":empty",
        cpu = "asmjs",
        dwp_files = ":empty",
        dynamic_runtime_libs = [":empty"],
        linker_files = ":empty",
        objcopy_files = ":empty",
        static_runtime_libs = [":empty"],
        strip_files = ":empty",
        supports_param_files = 0,
    )
    
  7. Run the build again. Bazel throws the following error:

    No toolchain found for cpu 'asmjs'.
    

    Since you have specified --crosstool_top and --cpu in the .bazelrc file, //toolchain:asmjs_toolchain is selected. Because we specify toolchain_identifier = "asmjs-toolchain", we need to create a toolchain definition with this identifier. Add the following to the CROSTOOL file:

    toolchain {
       toolchain_identifier: "asmjs-toolchain"
       host_system_name: "i686-unknown-linux-gnu"
       target_system_name: "asmjs-unknown-emscripten"
       target_cpu: "asmjs"
       target_libc: "unknown"
       compiler: "emscripten"
       abi_version: "unknown"
       abi_libc_version: "unknown"
     }
    

    The above definition also specifies the compiler, which you can use to more precisely select the C++ toolchain.

    Because we want to omit the --compiler flag and only use the --cpu flag, we have added a asmjs key into cc_toolchain_suite.toolchains.

  8. Run the build again. Bazel throws the following error:

    .../BUILD:1:1: C++ compilation of rule '//:helloworld.js' failed (Exit 1)
    src/main/tools/linux-sandbox-pid1.cc:421:
    "execvp(toolchain/DUMMY_GCC_TOOL, 0x11f20e0)": No such file or directory
    Target //:helloworld.js failed to build`
    

    At this point, Bazel has enough information to attempt building the code but it still does not know what tools to use to complete the required build actions. Add the following to your CROSSTOOL file to tell Bazel what tools to use:

    # toolchain/CROSSTOOL
    # ...
    tool_path {
        name: "gcc"
        path: "emcc.sh"
    }
    tool_path {
        name: "ld"
        path: "emcc.sh"
    }
    tool_path {
        name: "ar"
        path: "/bin/false"
    }
    tool_path {
        name: "cpp"
        path: "/bin/false"
    }
    tool_path {
        name: "gcov"
        path: "/bin/false"
    }
    tool_path {
        name: "nm"
        path: "/bin/false"
    }
    tool_path {
        name: "objdump"
        path: "/bin/false"
    }
    tool_path {
        name: "strip"
        path: "/bin/false"
    }
    

    You may notice the emcc.sh wrapper script, which delegates to the external emcc.py file. Create the script in the toolchain package directory with the following contents and set its executable bit:

    #!/bin/bash
    set -euo pipefail
    python external/emscripten_toolchain/emcc.py "$@"
    

    Paths specified in the CROSSTOOL file are relative to the location of the CROSSTOOL file itself.

    The emcc.py file does not yet exist in the workspace directory. To obtain it, you can either check the emscripten toolchain in with your project or pull it from its GitHub repository. This tutorial uses the latter approach. To pull the toolchain from the GitHub repository, add the following new_http_archive repository definitions to your WORKSPACE file:

    new_http_archive(
      name = 'emscripten_toolchain',
      url = 'https://github.com/kripken/emscripten/archive/1.37.22.tar.gz',
      build_file = 'emscripten-toolchain.BUILD',
      strip_prefix = "emscripten-1.37.22",
    )
    
    new_http_archive(
      name = 'emscripten_clang',
      url = 'https://s3.amazonaws.com/mozilla-games/emscripten/packages/llvm/tag/linux_64bit/emscripten-llvm-e1.37.22.tar.gz',
      build_file = 'emscripten-clang.BUILD',
      strip_prefix = "emscripten-llvm-e1.37.22",
    )
    

    In the workspace directory root, create the emscripten-toolchain.BUILD and emscripten-clang.BUILD files that expose these repositories as filegroups and establish their visibility across the build.

    First create the emscripten-toolchain.BUILD file with the following contents:

    package(default_visibility = ['//visibility:public'])
    
    filegroup(
      name = "all",
      srcs = glob(["**/*"]),
    )
    

    Next, create the emscripten-clang.BUILD file with the following contents:

    package(default_visibility = ['//visibility:public'])`
    
    filegroup(
      name = "all",
      srcs = glob(["**/*"]),
    )
    

    You may notice that the targets simply parse all of the files contained in the archives pulled by the new_http_archive repository rules. In a real world scenario, you would likely want to be more selective and granular by only parsing the files needed by the build and splitting them by action, such as compilation, linking, and so on. For the sake of simplicity, this tutorial omits this step.

  9. Run the build again. Bazel throws the following error:

    "execvp(toolchain/emcc.sh, 0x12bd0e0)": No such file or directory
    

    You now need to make Bazel aware of the artifacts you added in the previous step. In particular, the emcc.sh script must also be explicitly listed as a dependency of the corresponding cc_toolchain rule. Modify the toolchain/BUILD file to look as follows:

    package(default_visibility = ['//visibility:public'])
    
    cc_toolchain_suite(
    name = "emscripten",
    toolchains = {
       "asmjs": ":asmjs_toolchain",
       "asmjs|emscripten": ":asmjs_toolchain",
       },
    )
    
    filegroup(name = "empty")
    
    filegroup(
    name = "all",
    srcs = [
       "emcc.sh",
       "@emscripten_toolchain//:all",
       "@emscripten_clang//:all"
    ],
    )
    
    cc_toolchain(
       name = "asmjs_toolchain",
       toolchain_identifier = "asmjs-toolchain",
       all_files = ":all",
       compiler_files = ":all",
       cpu = "asmjs",
       dwp_files = ":empty",
       dynamic_runtime_libs = [":empty"],
       linker_files = ":all",
       objcopy_files = ":empty",
       static_runtime_libs = [":empty"],
       strip_files = ":empty",
       supports_param_files = 0,
    )
    

    Congratulations! You are now using the emscripten toolchain to build your C++ sample code. The next steps are optional but are included for completeness.

  10. (Optional) Run the build again. Bazel throws the following error:

    ERROR: .../BUILD:1:1: C++ compilation of rule '//:helloworld.js' failed (Exit 1)
    

    The next step is to make the toolchain deterministic and hermetic - that is, limit it to only touch files it’s supposed to touch and ensure it doesn’t write temporary data outside the sandbox.

    You also need to ensure the toolchain does not assume the existence of your home directory with its configuration files and that it does not depend on unspecified environment variables.

    For our example project, make the following modifications to the toolchain/BUILD file:

    filegroup(
      name = "all",
      srcs = [
        "emcc.sh",
        "@emscripten_toolchain//:all",
        "@emscripten_clang//:all",
        ":emscripten_cache_content"
        ],
     )
    
    filegroup(
      name = "emscripten_cache_content",
      srcs = glob(["emscripten_cache/**/*"]),
    )
    

    Since emscripten caches standard library files, you can save time by not compiling stdlib for every action and also prevent it from storing temporary data in random place, check in the precompiled bitcode files into the toolchain/emscript_cache directory. You can create them by calling the following from the emscripten_clang repository (or let emscripten create them in ~/.emscripten_cache):

    embuilder.py build dlmalloc libcxx libc gl libcxxabi libcxx_noexcept wasm-libc
    

    Copy those files to toolchain/emscripten_cache. Modify your toolchain/BUILD file to look as follows:

    
    filegroup(
      name = "all",
      srcs = [
          "emcc.sh",
          "@emscripten_toolchain//:all",
          "@emscripten_clang//:all",
          ":emscripten_cache_content"
          ],
    )
    
    filegroup(
      name = "emscripten_cache_content",
      srcs = glob(["emscripten_cache/**/*"]),
    )
    

    Also update the emcc.sh script to look as follows:

    #!/bin/bash
    
    set -euo pipefail
    
    export LLVM_ROOT='external/emscripten_clang'
    export EMSCRIPTEN_NATIVE_OPTIMIZER='external/emscripten_clang/optimizer'
    export BINARYEN_ROOT='external/emscripten_clang/'
    export NODE_JS=''
    export EMSCRIPTEN_ROOT='external/emscripten_toolchain'
    export SPIDERMONKEY_ENGINE=''
    export EM_EXCLUSIVE_CACHE_ACCESS=1
    export EMCC_SKIP_SANITY_CHECK=1
    export EMCC_WASM_BACKEND=0
    
    mkdir -p "tmp/emscripten_cache"
    
    export EM_CACHE="tmp/emscripten_cache"
    export TEMP_DIR="tmp"
    
    # Prepare the cache content so emscripten doesn't keep rebuilding it
    cp -r toolchain/emscripten_cache/* tmp/emscripten_cache
    
    # Run emscripten to compile and link
    python external/emscripten_toolchain/emcc.py "$@"
    
    # Remove the first line of .d file
    find . -name "*.d" -exec sed -i '2d' {} \;
    

    Bazel can now properly compile the sample C++ code in helloworld.cc.

  11. (Optional) Run the build again. Bazel throws the following error:

    ..../BUILD:1:1: undeclared inclusion(s) in rule '//:helloworld.js':
    this rule is missing dependency declarations for the following files included by 'helloworld.cc':
    '.../external/emscripten_toolchain/system/include/libcxx/stdio.h'
    '.../external/emscripten_toolchain/system/include/libcxx/__config'
    '.../external/emscripten_toolchain/system/include/libc/stdio.h'
    '.../external/emscripten_toolchain/system/include/libc/features.h'
    '.../external/emscripten_toolchain/system/include/libc/bits/alltypes.h'
    

    At this point you have successfully compiled the example C++ code. The error above occurs because Bazel uses a .d file produced by the compiler to verify that all includes have been declared and to prune action inputs.

    In the .d file, Bazel discovered that our source code references system headers that have not been explicitly declared in the BUILD file. This in and of itself is not a problem and you can easily fix this by adding the target folders as -isystem directories to the toolchain definition in the CROSSTOOL file as follows:

    compiler_flag: "-isystem"
    compiler_flag: "external/emscripten_toolchain/system/include/libcxx"
    compiler_flag: "-isystem"
    compiler_flag: "external/emscripten_toolchain/system/include/libc"
    
  12. (Optional) Run the build again. With this final change, the build now completes error-free.