When writing rules, the most common performance pitfall is to traverse or copy data that is accumulated from dependencies. When aggregated over the whole build, these operations can easily take O(N^2) time or space. To avoid this, it is crucial to understand how to use depsets effectively.
This can be hard to get right, so Bazel also provides a memory profiler that assists you in finding spots where you might have made a mistake. Be warned: The cost of writing an inefficient rule may not be evident until it is in widespread use.
- Use depsets
ctx.actions.args()for command lines
- Transitive action inputs should be depsets
- Performance profiling
- Memory Profiling
Whenever you are rolling up information from rule dependencies you should use depsets. Only use plain lists or dicts to publish information local to the current rule.
A depset represents information as a nested graph which enables sharing.
Consider the following graph:
C -> B -> A D ---^
Each node publishes a single string. With depsets the data looks like this:
a = depset(direct=['a']) b = depset(direct=['b'], transitive=[a]) c = depset(direct=['c'], transitive=[b]) d = depset(direct=['d'], transitive=[b])
Note that each item is only mentioned once. With lists you would get this:
a = ['a'] b = ['b', 'a'] c = ['c', 'b', 'a'] d = ['d', 'b', 'a']
Note that in this case
'a' is mentioned four times! With larger graphs this
problem will only get worse.
Here is an example of a rule implementation that uses depsets correctly to publish transitive information. Note that it is OK to publish rule-local information using lists if you want since this is not O(N^2).
MyProvider = provider() def _impl(ctx): my_things = ctx.attr.things all_things = depset( direct=my_things, transitive=[dep[MyProvider].all_things for dep in ctx.attr.deps] ) ... return [MyProvider( my_things=my_things, # OK, a flat list of rule-local things only all_things=all_things, # OK, a depset containing dependencies )]
See the depset overview page for more information.
You can coerce a depset to a flat list using
to_list(), but doing so usually results in O(N^2)
cost. If at all possible, avoid any flattening of depsets except for debugging
A common misconception is that you can freely flatten depsets if you only do it
at top-level targets, such as an
<xx>_binary rule, since then the cost is not
accumulated over each level of the build graph. But this is still O(N^2) when
you build a set of targets with overlapping dependencies. This happens when
building your tests
//foo/tests/..., or when importing an IDE project.
Note: Today it is possible to flatten depsets implicitly by iterating over
the depset the way you would a list, tuple, or dictionary, or by taking the
depset’s size via
len(). This functionality is deprecated.
and will be removed.
It is O(N) to get the number of items in a depset. It is however O(1) to check if a depset is empty. This includes checking the truthiness of a depset:
def _impl(ctx): args = ctx.actions.args() files = depset(...) # Bad, has to iterate over entire depset to get length if len(files) != 0: args.add("--files") args.add_all(files) # Good, O(1) if files: args.add("--files") args.add_all(files)
As mentioned above, support for
len(<depset>) is deprecated.
ctx.actions.args() for command lines
When building command lines you should use ctx.actions.args(). This defers expansion of any depsets to the execution phase.
Apart from being strictly faster, this will reduce the memory consumption of your rules – sometimes by 90% or more.
Here are some tricks:
Pass depsets and lists directly as arguments, instead of flattening them yourself. They will get expanded by
ctx.actions.args()for you. If you need any transformations on the depset contents, look at ctx.actions.args#add to see if anything fits the bill.
Avoid constructing strings by concatenating them together. The best string argument is a constant as its memory will be shared between all instances of your rule.
If the args are too long for the command line an
ctx.actions.args()object can be conditionally or unconditionally written to a param file using
ctx.actions.args#use_param_file. This is done behind the scenes when the action is executed. If you need to explicitly control the params file you can write it manually using
def _impl(ctx): ... args = ctx.actions.args() file = ctx.declare_file(...) files = depset(...) # Bad, constructs a full string "--foo=<file path>" for each rule instance args.add("--foo=" + file.path) # Good, shares "-foo" among all rule instances, and defers file.path to later args.add("--foo") args.add(file) # Use format if you prefer ["--foo=<file path>"] to ["--foo", <file path>] args.add(format="--foo=%s", value=file) # Bad, makes a giant string of a whole depset args.add(" ".join(["-I%s" % file.short_path for file in files]) # Good, only stores a reference to the depset args.add_all(files, format_each="-I%s", map_each=_to_short_path) # Function passed to map_each above def _to_short_path(f): return f.short_path
Transitive action inputs should be depsets
When building an action using ctx.actions.run, do not
forget that the
inputs field accepts a depset. Use this whenever inputs are
collected from dependencies transitively.
inputs = depset(...) ctx.actions.run( inputs = inputs, # Do *not* turn inputs into a list ... )
To profile your code and analyze the performance you have two options:
- use the
--profileflag and the
- use the new
--experimental_generate_json_trace_profileflag and load the resulting JSON profile in
–profile and analyze-profile
This profiling method consists of two steps, first you have to execute your
build/test with the
--profile flag, for example
$ bazel build --nobuild --profile=/tmp/prof //path/to:target
The file generated (in this case
/tmp/prof) is a binary file, which can be
postprocessed and analyzed by the
$ bazel analyze-profile /tmp/prof
By default, it prints summary analysis information for the specified profile datafile. This includes cummaltive statistics for different task types for each build phase and an analysis of the critical path.
The first section of the default output is an overview of the time spent on the different build phases:
=== PHASE SUMMARY INFORMATION === Total launch phase time 978 ms 2.67% Total init phase time 178 ms 0.49% Total loading phase time 381 ms 1.04% Total analysis phase time 2.618 s 7.15% Total preparation phase time 46.0 ms 0.13% Total execution phase time 32.366 s 88.46% Total finish phase time 19.3 ms 0.05% Total run time 36.586 s 100.00%
The following sections show the execution time of different tasks happening during that particular phase, for example:
=== EXECUTION PHASE INFORMATION === Total preparation time 46.0 ms Total execution phase time 32.366 s Total time finalizing build 19.3 ms Actual execution time 32.366 s Total time (across all threads) spent on: Type Total Count Average ACTION 0.01% 131 0.44 ms ACTION_EXECUTE 31.72% 131 2.635 s INFO 0.00% 10 1.32 ms VFS_STAT 0.02% 32187 0.01 ms VFS_DIR 0.01% 4401 0.02 ms VFS_READLINK 0.00% 6 0.01 ms VFS_MD5 0.50% 4652 1.16 ms VFS_DELETE 0.02% 9336 0.03 ms VFS_OPEN 0.01% 4706 0.01 ms VFS_READ 0.06% 182413 0.00 ms VFS_WRITE 0.01% 17691 0.00 ms WAIT 16.12% 544 322 ms SKYFRAME_EVAL 2.97% 1 32.343 s SKYFUNCTION 48.59% 57301 9.23 ms
The last section shows the critical path:
Critical path (31.410 s): Id Time Percentage Description 132283 1.219 s 3.88% action 'Executing genrule //src bazel-bin' 132282 13.591 s 43.27% action 'Executing genrule //src package-zip' 132281 1.263 s 4.02% action 'Executing genrule //src install_base_key-file' 132280 381 ms 1.21% action 'Building deploy jar src/main/java/com/google/devtools/build/lib/bazel/BazelServer_deploy.jar' 132279 1.10 ms 0.00% runfiles for //src/main/java/com/google/devtools/build/lib bazel/BazelServer 132278 398 ms 1.27% action 'Building Java resource jar' 132277 8.292 s 26.40% action 'Building src/main/java/com/google/devtools/build/lib/libbazel-rules-class.jar (133 source files) and running annotation processors (AutoCodecProcessor, OptionProcessor, AutoAnnotationProcessor, AutoValueProcessor)' ...
You can use the following options to display more detailed information:
--dump=text: Print all recorded tasks in the order they occurred.
--dump=raw: Use this for automated analysis with scripts.
--html: Writes a file called
<profile-file>.htmlin the directory of the profile file. Open it in you browser to see a Gantt type chart that displays time on the horizontal axis and threads of execution along the vertical axis.
--html_details: Renders a more detailed execution chart. Beware that this increases file size and browser load considerably.
When you add the flag
--experimental_generate_json_trace_profile to your Bazel
invocations, Bazel will write a JSON profile in Chrome Trace
We suggest to use the flag together with the following flags:
--experimental_json_trace_compression: The profile will be compressed with gzip.
--experimental_profile_cpu_usage: Bazel will measure and include local CPU usage in the JSON profile.
$ bazel build --experimental_generate_json_trace_profile --experimental_profile_cpu_usage //third_party/zlib/... INFO: Writing tracer profile to '/home/johndoe/.cache/bazel/_bazel_twerth/f01bc937da326f5bb0feb15c854c110c/command.profile' INFO: Invocation ID: 34995931-ef6f-4838-9ab1-9a0bc39a8712 INFO: Analysed 3 targets (7 packages loaded, 316 targets configured). INFO: Found 3 targets... INFO: Elapsed time: 1.223s, Critical Path: 0.27s INFO: 17 processes: 17 linux-sandbox. INFO: Build completed successfully, 20 total actions
The resulting profile file
in this case; can be configured by the
--profile=<path> flag) can then be
loaded and viewed in Chrome. For this, open
chrome://tracing in a new tab,
Load and pick the profile file.
The top row (‘cpu counters’) shows the local CPU usage, which is high in this build during the analysis phase and then gets lower during execution. The second row (‘Critical Path’) refers to the critical path of the build, that is even with infinite parallelism the build would not be faster than the actions in this path. The third row (‘grpc-command-1’) displays everything that’s happening on Bazel’s main thread, giving a high level overview of what Bazel is doing. The remaining rows show what the worker threads are doing.
You can interact with the profile, for example zoom in, inspect particular tasks,
filter for task descriptions and select multiple tasks to get an overview. Press
? to get an overview of what you can do.
When analyzing these kind of profiles look for the following:
- Slow analysis phase (RunAnalysisPhase), especially on incremental builds. This can be a sign of a poor rule implementation, for example one that flattens nested sets.
- Individual slow actions, especially those on the critical path. It might be possible to split large actions into multiple smaller actions or reduce the dependencies to speed them up.
- Bottlenecks, that is a small number of threads is busy while all others are idleing waiting for the result. Optimizing this will most likely require touching the rule implementations to introduce more parallelism.
Note that we filter out fast tasks and certain task types completely to keep the profile files small enough to render fast in the Chrome Trace Viewer.
Bazel comes with a built-in memory profiler that can help you check your rule’s memory use. If there is a problem you can dump the heap to find the exact line of code that is causing the problem.
Enabling Memory Tracking
You must pass these two startup flags to every Bazel invocation:
STARTUP_FLAGS=\ --host_jvm_args=-javaagent:$(BAZEL)/third_party/allocation_instrumenter/java-allocation-instrumenter-3.0.1.jar \ --host_jvm_args=-DRULE_MEMORY_TRACKER=1
NOTE: The bazel repository comes with an allocation instrumenter. Make sure to adjust ‘$(BAZEL)’ for your repository location.
These start the server in memory tracking mode. If you forget these for even one Bazel invocation the server will restart and you will have to start over.
Using the Memory Tracker
Let’s have a look at the target
foo and see what it’s up to. We add
--nobuild since it doesn’t matter to memory consumption if we actually build
or not, we just have to run the analysis phase.
$ bazel $(STARTUP_FLAGS) build --nobuild //foo:foo
Let’s see how much memory the whole Bazel instance consumes:
$ bazel $(STARTUP_FLAGS) info used-heap-size-after-gc > 2594MB
Let’s break it down by rule class by using
bazel dump --rules:
$ bazel $(STARTUP_FLAGS) dump --rules > RULE COUNT ACTIONS BYTES EACH genrule 33,762 33,801 291,538,824 8,635 config_setting 25,374 0 24,897,336 981 filegroup 25,369 25,369 97,496,272 3,843 cc_library 5,372 73,235 182,214,456 33,919 proto_library 4,140 110,409 186,776,864 45,115 android_library 2,621 36,921 218,504,848 83,366 java_library 2,371 12,459 38,841,000 16,381 _gen_source 719 2,157 9,195,312 12,789 _check_proto_library_deps 719 668 1,835,288 2,552 ... (more output)
And finally let’s have a look at where the memory is going by producing a
pprof file using
bazel dump --skylark_memory:
$ bazel $(STARTUP_FLAGS) dump --skylark_memory=$HOME/prof.gz > Dumping skylark heap to: /usr/local/google/home/$USER/prof.gz
Next, we use the
pprof tool to investigate the heap. A good starting point is
getting a flame graph by using
pprof -flame $HOME/prof.gz.
You can get
pprof from https://github.com/google/pprof.
In this case we get a text dump of the hottest call sites annotated with lines:
$ pprof -text -lines $HOME/prof.gz > flat flat% sum% cum cum% 146.11MB 19.64% 19.64% 146.11MB 19.64% android_library <native>:-1 113.02MB 15.19% 34.83% 113.02MB 15.19% genrule <native>:-1 74.11MB 9.96% 44.80% 74.11MB 9.96% glob <native>:-1 55.98MB 7.53% 52.32% 55.98MB 7.53% filegroup <native>:-1 53.44MB 7.18% 59.51% 53.44MB 7.18% sh_test <native>:-1 26.55MB 3.57% 63.07% 26.55MB 3.57% _generate_foo_files /foo/tc/tc.bzl:491 26.01MB 3.50% 66.57% 26.01MB 3.50% _build_foo_impl /foo/build_test.bzl:78 22.01MB 2.96% 69.53% 22.01MB 2.96% _build_foo_impl /foo/build_test.bzl:73 ... (more output)